Do bazy wiedzy
Dokument informacyjny #3498

Connecting FRITZ!Powerline to a router from another manufacturer over LAN

Connect FRITZ!Powerline to your router via LAN to add an additional wireless access point to your home network quickly and easily. This way you will have ideal Wi-Fi reception and high-speed connections to the internet and home network, even when outside the Wi-Fi range of your router.

If you use the same Wi-Fi settings in the FRITZ!Powerline device as in the router, your wireless devices automatically connect with the Wi-Fi network with the strongest signal (Wi-Fi roaming).

Connection scenario for LAN bridge mode

1 Loading the factory settings of the FRITZ!Powerline device

To perform the following steps, the FRITZ!Powerline device must be set to factory settings:

  1. Plug the FRITZ!Powerline device into an outlet and wait until the Power LED or WLAN LED remains lit or the Connect LED flashes slowly.
  2. Push the corresponding button on the device:
    ModelButtonDuration
    FRITZ!Powerline 1260(E) / 1240 AX Connect 15 seconds
    FRITZ!Powerline 1220 / 1210 Connect 10-15 seconds
    FRITZ!Powerline 1240E WLAN - WPS
    Powerline - Security    		 15 seconds
    FRITZ!Powerline 1220E / 1000E Powerline · Security 10-15 seconds
    FRITZ!Powerline 546E / 540E WLAN · WPS und Powerline · Security 10 seconds
    FRITZ!Powerline 530E / 510E Security 12 seconds
    FRITZ!Powerline 520E / 500E Reset 2 seconds
  3. During this process, all of the LEDs flash once. The Power LED or WLAN LED remains lit or the Connect LED flashes slowly as soon as the factory settings have finished loading.

2 Connecting the FRITZ!Powerline device to the router

  1. Use a network cable to connect the FRITZ!Powerline device to a LAN port on the router.

3 Setting up the FRITZ!Powerline device as a LAN bridge

  1. Click "Access to Home Network" in the user interface of FRITZ!Powerline.
  2. Click the "Change the Type of Connection" button in the "Access to Home Network" menu.
  3. Enable the option "LAN bridge" and click "Next".
  4. Select which IP settings the FRITZ!Powerline device should use and click "Next".
  5. Accept the preset Wi-Fi settings of the FRITZ!Powerline device or configure individual Wi-Fi settings and click "Next".
  6. Click "Finish" to save the settings.

4 Adjusting the FRITZ!Powerline device's Wi-Fi settings

Routers and FRITZ!Powerline devices can use the same or different Wi-Fi network names (SSIDs) and Wi-Fi security settings for registering wireless devices.

Use the same Wi-Fi settings in the FRITZ!Powerline device as in the router so that your wireless devices automatically connect with the Wi-Fi network with the strongest signal (Wi-Fi roaming):

  1. Click "Wi-Fi" in the user interface of FRITZ!Powerline.
  2. Click "Wi-Fi Network" ("Radio Network") in the "Wi-Fi" ("Wireless") menu.
  3. Enter the Wi-Fi network name of the router in the field "Name of the Wi-Fi network (SSID)".
  4. Click "Apply" to save the settings.
  5. Click "Security" in the "Wi-Fi" ("Wireless") menu.
  6. Click on the "Encryption" tab.
  7. Enter the router's Wi-Fi network key in the "Network key" field.
  8. Click "Apply" to save the settings.

5 Adding additional FRITZ!Powerline devices

If you want to set up a new powerline network with additional FRITZ!Powerline devices over your home's wiring, you can easily connect them by pressing a button on the FRITZ!Powerline device that you just set up:

  1. Plug the FRITZ!Powerline device you want to add to the powerline network into an outlet near the FRITZ!Powerline device that you already configured.
  2. Wait until the FRITZ!Powerline device is ready for operation and the Connect LED flashes slowly or the Power LED or WLAN LED remains lit.
  3. Briefly push the Connect button (see table) on both of the FRITZ!Powerline devices. You can push the button on whichever FRITZ!Powerline device you want first. When you release the button, the Powerline or Connect LED flashes. Depending on the FRITZ!Powerline model, several other LEDs flash at the same time.
    FRITZ!Powerline modelConnect button
    FRITZ!Powerline 1260(E) / 1240 AX / 1220 / 1210 Connect
    FRITZ!Powerline 1240E WLAN - WPS
    Powerline - Security
    FRITZ!Powerline 1220E / 1000E / 546E / 540E Powerline · Security
    FRITZ!Powerline 530E / 520E / 510E / 500E Security
  4. The process is completed and the FRITZ!Powerline devices are connected with each other as soon as the Powerline LED remains lit.



Related topics:

Wybór języka