Do bazy wiedzy
Dokument informacyjny #3325
FRITZ!Fon M2
Ten dokument pomocniczy jest dostępny dla następujących produktów:

FRITZ!Fon does not turn on

The FRITZ!Fon does not turn on anymore. When you try to turn the phone on, the message key and end call key light up red, but the display remains black and the phone does not work.

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Charging the rechargeable battery

  1. Plug in the charging station. Make sure that both plugs on the charging cable are inserted correctly.
  2. Leave the phone in the charging station for at least 6 hours to fully charge the phone's rechargeable battery. Make sure that the phone is placed correctly in the charging station.

2 Checking the battery

The FRITZ!Fon's rechargeable battery may be defective. There are two different ways to check the battery:

Testing a different rechargeable battery

If you have another FRITZ!Fon with the same type of rechargeable battery, try using the other battery for testing purposes:

  1. Fully charge the other rechargeable battery and insert the battery into the phone.

If you can switch the phone on now, the other rechargeable battery is defective.

Switching on in charging station while battery is removed

  1. Remove the rechargeable battery from the phone.
  2. Place the phone in the charging station without its rechargeable battery.

If the phone starts while in the charging station, the rechargeable battery is defective.

3 Replacing the rechargeable battery

You can purchase a genuine replacement battery from an electronics retailer. Using so-called aftermarket batteries that are not originals, such as can be found online, may damage your FRITZ!Fon.

Important:Rechargeable batteries wear out because they are subject to a technology-related ageing process and are therefore not covered by the warranty (see warranty in the manual).

Wybór języka