Do bazy wiedzy
Dokument informacyjny #136

Registering FRITZ!Fon

You want to register a cordless phone with the FRITZ!Box? ✔ Here we show you how to easily connect your DECT phone.

Our FRITZ!Fon models are optimized for use with the FRITZ!Box. Simply use the wizard in the FRITZ!Box user interface or your phone's menu to register them. You can register a FRITZ!Fon with up to four base stations and switch the active base station if needed via 'Menu > Settings > Registration > Select Base'. Of course, you can also use the menu to register FRITZ!Fon with a base station from another manufacturer.

Requirements / Restrictions

  • The base station must support the DECT-GAP profile. 

    Note:DECT-GAP is a common standard for cordless phones supported by all FRITZ!Box models with integrated DECT base stations.

1 Using the FRITZ!Box wizard to register a phone

  1. Click on 'Telephony' in the FRITZ!Box user interface.
  2. Click on 'Telephony Devices' in the 'Telephony' menu.
  3. Click on the 'Configure New Device' button.
  4. Enable the option 'Telephone (with or without answering machine)' and click on 'Next'.
  5. Enable the option 'Cordless (DECT) telephone' and click on 'Next'.
  6. Start the registration procedure on the phone, then click "Next" and follow the instructions.
  7. If you are asked to enter the PIN, enter the FRITZ!Box's four-digit PIN on the phone and confirm it with 'OK'.

    Note:You only have to enter the PIN if you changed the preconfigured PIN '0000' in the FRITZ!Box user interface in the menu 'Telephony > DECT > Base Station'. When using the wizard to register phones, you do not have to push any buttons on the FRITZ!Box.

2 Using the phone's menu to register a phone

Registering FRITZ!Fon with the FRITZ!Box

  1. Switch the phone on and press the right select key 'Register'. If 'Register' is not displayed above the right select key:
    1. Press the 'Menu' key.
    2. Select the menu item 'Settings' and press 'OK'.
    3. 'Registration' > 'Register' > 'OK'
  2. Within 2 minutes: Push the registration button on the FRITZ!Box. Which button you must push depends on the FRITZ!Box model:

    Note:With FRITZ!Box models that have DECT and Connect buttons, you can use either button.

    • If your model has a Connect button, push the Connect button on the FRITZ!Box. Hold down the button for about 1 second until the Connect LED starts to flash. The FRITZ!Box is in registration mode as long as the LED flashes. Other LEDs may also flash.
    • If your model has a DECT button, push the DECT button on the FRITZ!Box. Hold down the button for at least 6 seconds until the DECT or Info LED on the FRITZ!Box starts to flash. The FRITZ!Box is in registration mode as long as the LED flashes.
  3. If you are asked to enter the PIN, enter the FRITZ!Box's four-digit PIN on the phone and confirm it with 'OK'.

    Note:You only have to enter the PIN if you changed the preconfigured PIN '0000' in the FRITZ!Box user interface in the menu '[Telephony >] DECT > Base Station'.

Registering FRITZ!Fon with a base station from another manufacturer

  1. Switch the phone on and press the right select key 'Register'. If 'Register' is not displayed above the right select key:
    1. Press the 'Menu' key.
    2. Select the menu item 'Settings' and press 'OK'.
    3. 'Registration' > 'Register' > 'OK'
  2. Push the registration button on the base station.
  3. Enter the PIN of the base station and confirm it with 'OK'.



Help topics:

Wybór języka