Do bazy wiedzy
Dokument informacyjny #119

Parties cannot hear each other

When conducting calls, one of the following issues either occasionally occurs or always occurs. It either occurs right at the beginning of the conversation or sometime during the conversation, for example after five minutes:

  • You do not hear the other party.
  • The other party does not hear you.
  • The parties cannot hear each other.

This may give the impression that the telephone connection has been terminated. However, the connection is still active. You can see that it is because the telephony LED on the FRITZ!Box remains lit. The LED does not switch off until you end the call by hanging up.

1 Restarting the FRITZ!Box

  1. Click on 'System' in the FRITZ!Box user interface.
  2. Click on 'Backup' in the 'System' menu.
  3. Click on the 'Restart' tab.
  4. Click on the 'Restart' button.

2 Configuring security software

The following steps are only necessary if the problem occurs when using FRITZ!App Fon:

  1. Briefly disable security software (for example Norton mobile Security) and VPN connections to any internet anonymization services (for example iCloud Privat-Relay, Nord VPN) on your telephone.
  2. Check whether you can now make calls with FRITZ!App Fon without any problems.
  3. If you can make calls now, then the security software was interfering with the voice connection. Re-enable the software and configure it so that it allows voice connections. Refer to the manufacturer for information on how to set it up, for example consult the manual.

3 Activating the microphone

The following steps are only necessary if the problem occurs with FRITZ!App Fon on an iOS device:

  1. Open the iOS settings.
  2. Tap 'Privacy' and then 'Microphone'.
  3. Activate the microphone for FRITZ!App Fon.

4 Disabling expanded security functions and re-registering the telephone

The following steps are only necessary if the problem occurs with a cordless telephone from a different manufacturer:

Disabling expanded security functions

  1. Click on 'Telephony' in the FRITZ!Box user interface.
  2. Click on 'DECT' in the 'Telephony' menu.
  3. Disable the expanded security functions in the section 'Security'.
  4. Click on 'Apply' to save the settings.

Re-registering the telephone

  1. Register the telephone with the FRITZ!Box.

5 Disabling support for CAT-iq 2.0 and re-registering the telephone

The following steps are only necessary if the problem occurs with a cordless telephone from a different manufacturer:

Disabling support for CAT-iq 2.0

  1. Click on 'Telephony' in the FRITZ!Box user interface.
  2. Click on 'DECT' in the 'Telephony' menu.
  3. Disable the option 'Support for CAT-iq 2.0-compatible devices enabled' in the section 'Troubleshooting'.
  4. Click on 'Apply' to save the settings.

Re-registering the telephone

  1. Register the telephone with the FRITZ!Box.

6 Contacting your cable provider

We are not aware of any additional measures to correct the error; a solution on the part of the FRITZ!Box is not possible.

  1. Contact your cable provider.
Wybór języka